Oil Seals

Oils Seals are listed under their Payen reference number and usually prefixed with NA or NB, though some early A, B C, D etc prefixed seals are also listed where they do not interchange with later NA and NB numbers. Some of the more common and popular seals are newly remanufactured from modern materials though most are new old stock with many seals made from metal/leather. Where the seal is metal/leather and the leather has become hard, it should be softened before fitting by soaking in warm (35 degrees C) oil for c24 hours. Drain excess oil from the seal before fitting. As well as searching by part number you can also search by major dimensions and application using the search facilities below:

Oil Seals

Material Abbreviations

Prefix letters:

M = Metal Case or Re-inforcement
B = Cork Sealing Element
F = Felt Sealing Element
L = Leather Sealing Element
R = Synthetic Rubber Element (Nitrile)
Si = Silicone Rubber Element
Vi = Viton Rubber Element
Py = Polyacrylic Rubber Element
S = Steel Case or Re-inforcement
B = Brass Case or Re-inforcement

Seal Type – (See images below).

Suffix Letters:

R/H = Right Hand Rotation (Helix or Spiral)
L/H = Left Hand Rotation (Helix or Spiral)
Bi/D = Left or Right Hand Rotation (Bi-directional, Helix or Spiral)

Examples

M/F/L = Metal Case (or Re-inforcement) with (one) Felt and (one) Leather Sealing elements
M/Si(4B)L/H = Metal Case (or Re-inforcement) with (one) Silicone Sealing element, 4B seal design, Left Hand Rotation

Points of note with regard to oil seals:

  • Where it is necessary to replace a bearing or to disturb a seal, a new seal of the correct type and dimensions should be fitted. This is essential in the case of seals that protect the bearings in the hubs (front and rear). If these leak, braking efficiency is reduced. The three key dimensions as indicated in the search facility are:

    • The diameter of the housing into which the seal fits.

    • The diameter of the shaft on which the seal runs.

    • The width of the seal.

  • There are two main types of Oil Seal:-

    • Internal - fitted into the housing and remaining stationary whilst the shaft revolves inside the sealing element.
    • External - fitted on the shaft or boss and the housing rotates round the seal. This type of seal is found mostly in hubs.
  • Shafts should be checked for scoring. Score marks or burrs should be carefully removed.

  • Housings - The surface into which the seal fits should be perfectly smooth. All traces of abrasive matter or degreaser should be removed. Where seals are fitted into an aluminium or alloy housing, a greater amount of interference will be required. A useful tip is to immerse the housing in boiling water for a few minutes, remove it, and whilst it’s still hot, mount the seal and then allow to cool before assembly.
  • Fitting:
    • Remove all abrasive matter from shaft and housing.
    • Remove grease from the seal - use white spirit for leather and thin lubricating oil for synthetic rubber.
    • Smear the sealing element lightly with thin engine oil.
    • If using a dual type seal, always pack the space between the elements with a good quality grease.
    • The Tension Spring is designed to provide the correct loading and should not be altered. Note that the diameter of the sealing element should be approximately 1/16 " smaller than the shaft diameter, although in special applications it may be necessary to provide a different interference.
    • Ensure that the seal is mounted the correct way round. To retain oil or grease, the sealing lip must face the bearing, and to exclude dirt, the sealing lip should point away from the bearing.
    • The use of an Arbor Press is recommended when mounting the Oil Seal into the housing. Alternatively use a bung or drift slightly smaller in diameter than the steel shell of the seal, and ensure that the seal enters the housing squarely.
    • When mounting the shaft into the seal, the best method is to use a thin tapered sleeve.
    • If the housing is a heavy casting, do not allow the seal to rest on the shaft under its weight for any length of time as a permanent set may develop in the sealing element, which will render the seal ineffective. This is a vital consideration in the case of synthetic rubber seals.
Files

CEP OS P NA533 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C960

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.275 57.3532 9.525 1 5/8 2.258 3/8 M/R(4B)
Fits Makes:
Rover Final drive
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA534 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C986

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 57.9374 14.2875 1 1/2 2.281 9/16
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA535 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C987

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
37 53 8 1.456693 2.086614 0.314961
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA536 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C989

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 69.9516 9.525 1 7/8 2.754 3/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA537 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C990

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3375 50.9016 9.525 1 5/16 2.004 3/8

CEP OS P NA538 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C992

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 69.9516 7.9375 2 3/8 2.754 5/16 M/R(B/DAT)
Fits Makes:
Austin Front hub, inner

CEP OS P NA539 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C993

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
55.5625 65.1764 4.7625 2 3/16 2.566 3/16 M/R(B)
Fits Makes:
Austin Front hub, outer Rear hub

CEP OS P NA541 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C995

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.975 66.7766 4.7625 2 1/8 2.629 3/16 M/R(B)
Fits Makes:
Rover Front hub

CEP OS P NA542 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C996

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
51.990625 69.977 12.7 2 3/64 2.755 1/2 M/L(Std)
Fits Makes:
Ford Tractor Rear hub, inner

CEP OS P NA543 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C997

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 66.7766 11.1125 1 7/8 2.629 7/16 M/PY(B)
Fits Makes:
Ford Crankshaft

CEP OS P NA544 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C998

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.290625 60.452 12.7 1 35/64 2.38 1/2 M/R(BD)
Fits Makes:
Ford tractor Trans. output

CEP OS P NA545 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C999

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 63.6016 12.7 1 3/8 2.504 1/2 M/R(B/DAT)
Fits Makes:
Dodge truck Gearbox, rear, Commer Gearbox, rear

CEP OS P NA546 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1000

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45.24375 60.325 8.73125 1 25/32 2 3/8 11/32 M/PY(4B)
Fits Makes:
B.M.C. Clutch shaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA547 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1001

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
37.30625 62.1538 9.921875 1 15/32 2.447 25/64
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA548 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1002

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 74.041 7.9375 2 2.915 5/16 M/R(Spec.)
Fits Makes:
Ford Rear hub (outer)

CEP OS P NA549 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1003

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
46.0375 66.675 11.1125 1 13/16 2 5/8 7/16 M/R(Spec.Bec.)
Fits Makes:
Ford tractor Front hub

CEP OS P NA550 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1004

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 60.452 12.7 1 1/2 2.38 1/2 M/R(4B)
Fits Makes:
Singer Pinion, Hillman Rear hub

CEP OS P NA552 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1006

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 49.5554 9.525 1 3/8 1.951 3/8 M/PY(B)
Fits Makes:
Saab Crankshaft, front, Ford Taunus Balance shaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA553 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1008

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 52.4764 5.159375 1 9/16 2.066 13/64
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA555 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1010

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 57.15 9.921875 1 3/8 2 1/4 25/64

CEP OS P NA558 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1013

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40 52 7 1.574803 2.047244 0.275591 M/PY(4B)
Fits Makes:
Fiat Crankshaft, front
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA560 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1015

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
37.8 72.8 12.85 1.488189 2.866142 0.505906
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA561 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1016

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 61.4934 8.73125 1 1/2 2.421 11/32 M/R(Spec.)
Fits Makes:
Opel Front hub

CEP OS P NA562 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1017

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 69.9516 12.7 1 7/8 2.754 1/2 M/R(B)
Fits Makes:
Rover Rear hub, Caterpillar Hyd. power unit

CEP OS P NA563 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1018

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
52.3875 69.85 9.525 2 1/16 2 3/4 3/8 M/PY(3B)
Fits Makes:
Bedford Timing cover

CEP OS P NA564 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1019

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 58.8264 11.1125 1 3/8 2.316 7/16 M/L(Std)
Fits Makes:
Triumph Pinion, Morris Pinion

CEP OS P NA567 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1022

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.45 63.6524 9.525 1 3/4 2.506 3/8 M/PY(B)
Fits Makes:
Vauxhall Camshaft, front aux.shaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA569 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1024

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45 66 10 1.771654 2.598425 0.393701

CEP OS P NA570 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1025

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.19375 63.6016 12.7 1 1/32 2.504 1/2 M/R(B)
Fits Makes:
Vauxhall Rear axle pinion

CEP OS P NA571 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1026

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
51.59375 67.8688 9.525 2 1/32 2.672 3/8 M/PY(4B)
Fits Makes:
Vauxhall Crankshaft front

CEP OS P NA572 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1027

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
48.41875 63.7286 12.7 1 29/32 2.509 1/2 M/R(4B/DAT)
Fits Makes:
Rover Timing cover

CEP OS P NA573 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1028

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8625 57.2516 7.9375 1 11/16 2.254 5/16 M/R(4B)
Fits Makes:
Austin Front hub, outer

CEP OS P NA574 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Austin Front hub, inner

Comparable to other manufacturer part numbers - C1029

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.975 68.3768 7.9375 2 1/8 2.692 5/16 M/R(4B)
Fits Makes:
Austin Front hub, inner

CEP OS P NA575 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1030

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 69.9516 7.9375 2 3/8 2.754 5/16 M/R(B)
Fits Makes:
Austin Front hub, inner

CEP OS P NA576 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1031, 5330998169319

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
36.5125 52.6034 12.7 1 7/16 2.071 1/2 M/Si(4B)R/H
Fits Makes:
Ford Timing cover

CEP OS P NA577 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1035

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.45 63.754 9.525 1 3/4 2.51 3/8 M/R(4B)
Fits Makes:
S. &D. Gearbox primary, Rootes Timing cover, Guy Gearbox, rear, Ford Timing cover

CEP OS P NA578 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1036

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 50.9016 11.1125 1 3/8 2.004 7/16 M/R(4B/DAT)
Fits Makes:
B.M.C. Transmission

CEP OS P NA579 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1037

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
36.5125 52.4764 4.7625 1 7/16 2.066 3/16 M/R(4B/DAT)
Fits Makes:
Ford Front hub

CEP OS P NA580 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1038

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.275 60.4266 9.525 1 5/8 2.379 3/8 M/R(4B/DAT)
Fits Makes:
Ford Front hub

CEP OS P NA581 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1039

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
52 68 10 2.047244 2.677165 0.393701 M/Si(4B)R/H
Fits Makes:
Volvo Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA582 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal Ford

Comparable to other manufacturer part numbers - C1040

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.06875 56.388 6.985 1 21/32 2.22 0.275 M/Si(Spec.)
Fits Makes:
Ford Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA583 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1041, 105E-4676-B

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 72.6186 7.9375 1 9/16 2.859 5/16 M/R(Spec.)
Fits Makes:
Ford Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA584 - Oil seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil seal mini

Comparable to other manufacturer part numbers - C1042

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
54.67731 70.231 9.921875 2.15265 2.765 25/64 M/Si(Spec.)
Fits Makes:
flywheel cover, B.M.C. Crankshaft rear

CEP OS P NA585 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1043, 5330998332678

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40.084375 54.991 7.9375 1 37/64 2.165 5/16 M/R(4B/DAT)
Fits Makes:
Ford Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA586 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1044

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
43 63.76 9.5 1.692913 2.510236 0.374016

CEP OS P NA587 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1045

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 56.134 14.2875 1 3/8 2.21 9/16 M/R(4B/DAT)
Fits Makes:
Hillman Gearbox, rear

CEP OS P NA588 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1046

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.15 69.9516 9.525 2 1/4 2.754 3/8 M/R(BD)
Fits Makes:
Foden Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA589 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1047

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 62 9.5 1.751969 2.440945 0.374016

CEP OS P NA591 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D104, D482, NA696

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.975 76.2254 12.7 2 1/8 3.001 1/2 M/L(Std)
Fits Makes:
Winget , Seddon Sev. applic., S. &D. Gearbox, Scammell Rev. gear, Riley Rear hub, Ransome Crankcase, Packard Rear hub, Oliver-Cletrac Crankshaft, Minne-Moline Crankshaft, Meadows Gearbox, Massey-Ferguson Crankshaft , Jaeger Sev. applic., International Sev. applic., Hands trailer Axle, Guy Sev. applic., G.M.C. Clutch rel., David Brown Front hub, Daimler Sev. applic., County tractor Layrub drive, Conti. engine Crankshaft, Clark Timing cover, Case Crankshaft, Boden Davis Axle, Austin-Western Bevel gear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA592 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D107

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 76.23 12.7 2.248031 3.001181 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA593 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D108

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 76.23 12.7 2.248031 3.001181 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA594 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D109

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 76.23 9.5 2.248031 3.001181 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA595 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D111

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 81.13 12.7 1.874016 3.194094 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA596 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D116

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
55.5 81.13 11.9 2.185039 3.194094 0.468504
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA597 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D117

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 81.13 12.7 2.248031 3.194094 1/2

CEP OS P NA598 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D120

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.15 85.217 12.7 2 1/4 3.355 1/2 M/L(Std)
Fits Makes:
Scammell , Foden lnt. shaft, Bedford Sev. applic., Albion Sev. applic.
Product Image

CEP OS P NA599 - Oil Seal

From £46.06 (£55.27 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D124

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
55.5625 127 23.8125 2 3/16 5 15/16 M/L(Spec.)
Fits Makes:
Bedford Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA600 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D126

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 85.88 12.7 2.248031 3.381102 1/2

CEP OS P NA601 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D127

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.15 85.7504 12.7 2 1/4 3.376 1/2 M/L(Std)
Fits Makes:
Thornycroft Pinion, Seddon Gearbox, S. &D. Sev. applic., Petter-Mclaren Clutch, N.C.B. elect Gearbox, Moss axle Pinion, Morris comm. Winch gear, Meadows Gearbox, Jensen Pinion, lnternat. tractor Track idler, Dodge truck Sev. applic., Barber-Greene Gearbox, Armstrong Sidd. Front cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA603 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D137

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 76.23 12.7 1.751969 3.001181 1/2

CEP OS P NA605 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D145

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 82.55 7.540625 2 3/8 3 1/4 19/64 M/L(EC)
Fits Makes:
Wolseley Front hub, Morris Front hub, M.G. Front hub, Dodge truck Front hub, Austin comm. Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA606 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D148

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 82.65 12.7 2.374016 3.253937 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA607 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D154

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 85.75 12.7 2.374016 3.375984 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA608 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D155, D151

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 85.75 12.7 2.374016 3.375984 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA609 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D156

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 85.75 12.7 2 1/2 3.375984 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA610 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D158, 5330998016953

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 89.03 12.7 2 1/2 3.505118 1/2

CEP OS P NA611 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D160, 5330998174509

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 90.0938 12.7 2 1/2 3.547 1/2 M/L(Std)
Fits Makes:
Timken Sev. applic., Oliver-Cletrac Trans. front, Minne-Moline Trans. front, Massey-Ferguson Rear axle , Mack Sev. applic., Le Tourneau Sev. applic., Le Roi Crankshaft, Karrier Rear axle, lnternat. tractor Rear axle, Hough Rear axle, Fordson tractor Pulley, Ford tractor Pulley, Daimler pass. Pinion, Case Sev. applic., Buda Timing cover, Buckeye Front axle, Bedford Pinion, Allis Chalmers Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA612 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D164

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.8 90.1 12.7 2.748031 3.547244 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA613 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D170

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
65 95.38 12.7 2.559055 3.755118 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA614 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D176

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.9 77.88 12.7 2.122047 3.066142 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA616 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D182

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.8 98.55 12.7 2.748031 3.879921 1/2

CEP OS P NA617 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D183

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.85 95.377 12.7 2 3/4 3.755 1/2 M/R(Std)
Fits Makes:
Leyland P.T.O. shaft, lnternat. truck Rear axle, Foden Gearbox, David Brown Gearbox, Atkinson Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA618 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D188

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 85.75 12.7 2 3.375984 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA619 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D190, 5330998015103

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 81.13 12.7 2 3.194094 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA621 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D193

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
55.5 81.13 18.2 2.185039 3.194094 0.716535
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA622 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D197

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
73 95.56 9.5 2.874016 3.762205 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA624 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D205

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.6 92.18 11.9 2.622047 3.629134 0.468504
Fits Makes:
Wliite Pinion, Waukesha Crankshaft, Volvo Pinion, Timken Rear axle, Thornycroft Pinion, Reo Sev. applic, Oliver Cletrac Diff .., Newage Flywheel, Massey-Ferguson Brake shaft , Mack Sev. applic, Leyland Pinion, International Sev. applic., Hubber-Warco Trans. input, Guy Pinion, G.M.C. truck Sev. applic., Ford-Thames Pinion, E.R.F. Pinion, Eaton axle Pinion, Dodge truck Pinion, Diamond T Pinion, Dennis Pinion, Commer Pinion, Cockshutt Pinion, Clark axle Pinion, Chevrolet truck Pinion, Caterpillar Sev. applic, Case Sev. applic., B M.C. Pinion, Bedford Pinion, Barber-Greene Trans., Austin-Western Trans. ram, Atkinson Pinion, Athey Aux. trans., Allis Chalmers Pinion
Product Image

CEP OS P NA625 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D206, 5330998014976

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.7 80.39 15.1 1.562992 3.164961 0.594488
Fits Makes:
Willys Pinion, Volvo Pinion, Trojan Pinion, Studebaker Pinion, Spicer Pinion, Singer Pinion, Seddon Pinion, Salisbury Pinion, Packard Pinion, Morgan Pinion, Mercury Pinion, Lincoln Pinion, Lea-Francis Pinion, l.anchester Pinion, Kaiser Pinion, Jowett Pinion, Jaguar Pinion, lnternat. truck Pinion, Hudson Pinion, G.M.C. truck Pinion, Ford pass Pinion, Dodge truck Pinion, Daimler pass. Pinion, Bedford Pinion, Austin Pinion, Aston Martin Pinion, Armstrong Srdd. Pinion , Alvis Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA626 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D211

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.4 85.75 15.8 1.748031 3.375984 0.622047
Product Image

CEP OS P NA627 - Oil Seal

From £31.14 (£37.37 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D219

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.7 114.3 6 2.625984 4 1/2 0.23622
Fits Makes:
Plymouth Main brg, Dodge Main brg., De Soto Main brg, Chrysler Main brg
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA630 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D225

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.8 95.38 12.7 2.748031 3.755118 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA636 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D247

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 81.13 11.9 2 3.194094 0.468504
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA638 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D254

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 88.55 12.7 2.374016 3.48622 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA639 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D278

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
73 95.4 12.7 2.874016 3.755906 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA645 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D309

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 81.13 12.7 1.751969 3.194094 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA646 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D310, 5330998017273

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 95.37 12.7 2 1/2 3.754724 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA648 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D320

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 90.09 12.7 2.374016 3.54685 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA649 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D323

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 77.88 11.9 2.248031 3.066142 0.468504
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA651 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D327, 5330998016599

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.9 85.22 12.7 2.122047 3.355118 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA652 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D330

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
58.7 85.22 7.9 2.311024 3.355118 0.311024
Fits Makes:
alternative use ref NA781t, Rover F. & R. hubs
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA654 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D336

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
52.3 82.55 12.7 2.059055 3 1/4 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA655 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D347

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2 76.23 12.7 1.937008 3.001181 1/2
Fits Makes:
White Rear axle, Rover Gearbox, Jaeger Trans., lnternat. tractor Trans., Hough Trans., Caterpillar Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA657 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D359

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 85.22 18.2 2.374016 3.355118 0.716535
Fits Makes:
White Sev applic, Timken axle Pinion, Studebaker Rear axle pinion, Reo Sev. applic., Hercules Timing cover, G.M.C. truck Pinion, Ford-Thames Pinion, Ford truck Pinion, Dodge truck Pinion, DiamondT Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA658 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D360

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 80.06 7.9 2 1/2 3.151969 0.311024
Fits Makes:
Wolseley Front hub, Riley Front hub, Morris Front hub, Austin Front hub
Product Image

CEP OS P NA659 - Oil Seal

From £21.19 (£25.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D379

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
68.3 90.09 12.7 2.688976 3.54685 1/2
Fits Makes:
Bedford Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA660 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D380

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 92.2 12.7 2 3.629921 1/2
Fits Makes:
Karrier Prop. shaft, Dodge truck Prop. shaft, Commer Prop. shaft
Product Image

CEP OS P NA662 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D384

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.3 76.33 12.7 1.625984 3.005118 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA665 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D391, 5330998016542

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 88.55 17.4 2.374016 3.48622 0.685039
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA666 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D393

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
61.9 82.65 9.5 2.437008 3.253937 0.374016
Fits Makes:
Nuffield tractor Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA667 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D394

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
58.7 81.08 12.7 2.311024 3.192126 1/2
Fits Makes:
Nuffield tractor Final drive, lnternat. truck Trans. drive