Oil Seals

Oils Seals are listed under their Payen reference number and usually prefixed with NA or NB, though some early A, B C, D etc prefixed seals are also listed where they do not interchange with later NA and NB numbers. Some of the more common and popular seals are newly remanufactured from modern materials though most are new old stock with many seals made from metal/leather. Where the seal is metal/leather and the leather has become hard, it should be softened before fitting by soaking in warm (35 degrees C) oil for c24 hours. Drain excess oil from the seal before fitting. As well as searching by part number you can also search by major dimensions and application using the search facilities below:

Oil Seals

Material Abbreviations

Prefix letters:

M = Metal Case or Re-inforcement
B = Cork Sealing Element
F = Felt Sealing Element
L = Leather Sealing Element
R = Synthetic Rubber Element (Nitrile)
Si = Silicone Rubber Element
Vi = Viton Rubber Element
Py = Polyacrylic Rubber Element
S = Steel Case or Re-inforcement
B = Brass Case or Re-inforcement

Seal Type – (See images below).

Suffix Letters:

R/H = Right Hand Rotation (Helix or Spiral)
L/H = Left Hand Rotation (Helix or Spiral)
Bi/D = Left or Right Hand Rotation (Bi-directional, Helix or Spiral)

Examples

M/F/L = Metal Case (or Re-inforcement) with (one) Felt and (one) Leather Sealing elements
M/Si(4B)L/H = Metal Case (or Re-inforcement) with (one) Silicone Sealing element, 4B seal design, Left Hand Rotation

Points of note with regard to oil seals:

  • Where it is necessary to replace a bearing or to disturb a seal, a new seal of the correct type and dimensions should be fitted. This is essential in the case of seals that protect the bearings in the hubs (front and rear). If these leak, braking efficiency is reduced. The three key dimensions as indicated in the search facility are:

    • The diameter of the housing into which the seal fits.

    • The diameter of the shaft on which the seal runs.

    • The width of the seal.

  • There are two main types of Oil Seal:-

    • Internal - fitted into the housing and remaining stationary whilst the shaft revolves inside the sealing element.
    • External - fitted on the shaft or boss and the housing rotates round the seal. This type of seal is found mostly in hubs.
  • Shafts should be checked for scoring. Score marks or burrs should be carefully removed.

  • Housings - The surface into which the seal fits should be perfectly smooth. All traces of abrasive matter or degreaser should be removed. Where seals are fitted into an aluminium or alloy housing, a greater amount of interference will be required. A useful tip is to immerse the housing in boiling water for a few minutes, remove it, and whilst it’s still hot, mount the seal and then allow to cool before assembly.
  • Fitting:
    • Remove all abrasive matter from shaft and housing.
    • Remove grease from the seal - use white spirit for leather and thin lubricating oil for synthetic rubber.
    • Smear the sealing element lightly with thin engine oil.
    • If using a dual type seal, always pack the space between the elements with a good quality grease.
    • The Tension Spring is designed to provide the correct loading and should not be altered. Note that the diameter of the sealing element should be approximately 1/16 " smaller than the shaft diameter, although in special applications it may be necessary to provide a different interference.
    • Ensure that the seal is mounted the correct way round. To retain oil or grease, the sealing lip must face the bearing, and to exclude dirt, the sealing lip should point away from the bearing.
    • The use of an Arbor Press is recommended when mounting the Oil Seal into the housing. Alternatively use a bung or drift slightly smaller in diameter than the steel shell of the seal, and ensure that the seal enters the housing squarely.
    • When mounting the shaft into the seal, the best method is to use a thin tapered sleeve.
    • If the housing is a heavy casting, do not allow the seal to rest on the shaft under its weight for any length of time as a permanent set may develop in the sealing element, which will render the seal ineffective. This is a vital consideration in the case of synthetic rubber seals.
Files

CEP OS P NA001 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B101

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.9 28.65 9.5 0.625984 10.127953 0.374016 M/L(Std)
Fits Makes:
Willys Transfer box, Studebaker Trans. sel., Singer Gearbox, Rototiller Trans. shift, Massey Ferguson Sev. applic., Mack Water pump, J.A.P. engine Crankshaft, Internal. truck P.T.O. shift, Hillman Gearbox, Ford military Transfer box, Dennis Aux. trans, Daimler Fan, Cummins Fuel pump, Cockshutt Governor, Caterpillar Sev. applic., Case Sev. applic., Allis Chalmers Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA002 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B102

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 31.83 9.5 0.748031 10.25315 0.374016

CEP OS P NA003 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B104

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 35 6.3 0.874016 10.377953 0.248031 M/R(B)
Fits Makes:
alternative , Wolseley Steering, Sunbeam pass. Steering, Rover Brake pedal, Riley Steering, Nuffield Governor, Morris pass. Steering, Metropolitan Steering, Hillman Steering, Harper , Commer Steering, Austin Healey Steering, Austin comm. Governor, Austin Steering

CEP OS P NA004 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B106

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20.6 38.18 9.9 0.811024 10.50315 0.389764 M/L(Std)
Fits Makes:
Packard Water pump, Fordson tractor P.T.O shih, Dorman Governor, Caterpillar Sev applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA005 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B111

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 41.3 9.5 1 10.625984 0.374016

CEP OS P NA006 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B112

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 41.28 9.5 0.984252 10.625197 0.374016 M/L(Std)
Fits Makes:
Morgan Gearbox, Lansing Bagnall Gearbox, Jensen Gearbox, Ford Thames Sev. applic, Ford pass. Sev. apphc

CEP OS P NA007 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B113

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 41.3 9.5 0.874016 10.625984 0.374016 M/L(Std)
Fits Makes:
alternative , Morris comm. Fuel pump, Coles crane

CEP OS P NA008 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B114

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 43.66 11.1 1 10.718898 0.437008 M/L(Std)
Fits Makes:
Ford Thames Rear axle, Ford pass. Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA009 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B115

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 44.53 11.1 1 10.75315 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA010 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B124

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 44.53 6.3 10.248031 10.75315 0.248031

CEP OS P NA011 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B125, 538309980171

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 46.53 11.1 1 10.83189 0.437008 M/L(Std)
Fits Makes:
Wolseley Gearbox, Waukesha Access. drive, Standard Sev. applic., Oliver-Cletrac Sev. applic., Morris Gearbox, Morgan Gearbox, M.G Gearbox, Mack Fan drive, Jaguar Gearbox, International Sev. applic., Hudson Trans. front, Hands trailer Axle, G.M.C. Sev. applic., Foden Air comp., Dodge truck P.TO. shaft, Commer Air comp., Caterpillar Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA012 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B133 M/L

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 48.18 12.7 10.248031 10.89685 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA014 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B141

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 50.47 9.5 10.248031 10.987008 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA015 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B146

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12.7 28.68 9.5 1/2 10.129134 0.374016

CEP OS P NA018 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B157, 5330998015014

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 38.18 9.5 1 10.50315 0.374016 M/L(Std)
Fits Makes:
Wisconsin Reduct. gear, White Trans. shift, Studebaker Steering, Rover Governor, Oliver Cletrac Sev. applic, Massey-Ferguson Steering , Internal. tractor Steering, Hercules Water pump, Galion Steering, Euclid Steering, Chrysler grp. Sev. applic., Caterpillar Sev. applic., Case Sev. applic., Austin-Western Shifter, Allis Chalmers Sev. applic.

CEP OS P NA025 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B172

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 38.18 9.5 0.874016 10.50315 0.374016 M/L(Std)
Fits Makes:
White Aux. trans., Waukesha Acces. drive, Thornycroft Change spd, Scammell P.T.O sel, Reo Aux. trans, Massey-Ferguson Sev. applic., Mack Aux. trans., International Sev. applir, Hough Shifter arm, Hi-way trailer Axle, Hercules Water pump, G.M C Aux. trans, Gallon Transfer box, Dyson trailer Axle, Clark Hyd. pump, Caterpillar Sev. apphc, Case Trans shift, Buda Water, Bucyrus Erie Trans, Allis Chalmers Sev. Applic
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA026 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B175

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 35 9.5 0.748031 10.377953 0.374016

CEP OS P NA027 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B180

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 46.53 9.5 10.374016 10.83189 0.374016 M/L(Std)
Fits Makes:
White Steering, Towmotor Steering, Oliver-Cletrac P T.O., Mack Steering, Internal. truck Steering, G.M.C. truck Stecrinq, Ford truck Steering
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA029 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B184

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 47.7 11.1 10.122047 10.877953 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA031 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B199

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9 46.53 11.1 10.059055 10.83189 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA032 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B200

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
14.2 35 7.9 0.559055 10.377953 0.311024

CEP OS P NA033 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B203

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
9.5 19.13 6.3 0.374016 0.75315 0.248031 M/R(B)
Fits Makes:
Wolseley Speedo., Triumph pass Speedo., Sunbeam pass. Speedo., Standard Speedo., Singer Speedo., Ruston Hornsby Speeder, Morns Speedo., Humber Speedo., Hillman Speedo., Dodge truck Speedo., Continental Tach. Shift, Commer Speedo., Aveling Barford Tyre pump
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA035 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B206

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.8 31.83 9.5 0.622047 10.25315 0.374016

CEP OS P NA037 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B215

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9 38.18 6.3 10.059055 10.50315 0.248031 M/R(B)
Fits Makes:
Rover Sev applic., Riley Distributor, Petter McLaren Extension shaft, Austin Healey Distributor
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA040 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B224

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 46.53 11.1 10.122047 10.83189 0.437008

CEP OS P NA042 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B227, 5330998039824

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 38.18 6.3 10.122047 10.50315 0.248031 M/R(B)
Fits Makes:
Rover Steering, Oliver Cletrac Tying Gear, Lea Francis Steering, Jaguar Steering, Daimler Steering, Burman Steering, Armstrong Sidd Steering, Alvis Steering

CEP OS P NA043 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B228, 100E-3591-B

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20.6 30.23 6.3 0.811024 10.190157 0.248031 M/R(4B)
Fits Makes:
Standard Steering, Rover Front Susp, Ford-Thames Steering, Ford pass. Steering, Burman Steering

CEP OS P NA045 - Oil Seal

From £11.00 (£13.20 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B231, 5330998321989

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.8 28.65 6.3 0.622047 10.127953 0.248031 M/R(B)
Fits Makes:
Rover Brake shaft, Oliver-Cletrac Hyd Control, M.G Camshaft, Lagonda Timing case, Guy Gearbox, Foden Boost pump, Crossley Fuel pump, Conveyancer Torque conv, Aston Martin Timing case

CEP OS P NA046 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B244

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 44.6 9.5 10.248031 10.755906 0.374016 M/L(Std)
Fits Makes:
Packard Steering, Minne Moline Front Axle, Internal. truck Trans. Front

CEP OS P NA047 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B251

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 42.98 4.7 10.248031 10.692126 0.185039 M/R(BG)
Fits Makes:
Ross Steering, Rambler Steering, Packard Steering, M/Ferguson Steering, Mack Steering, International Steering, Gemmer Steering, Ford Steering, Diamond T Steering, Cockshutt Steering, Chrysler Steering, Allis Chalmers Steering

CEP OS P NA048 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B253, 5330995802558

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20.6 35 6.3 0.811024 10.377953 0.248031 M/R(B)
Fits Makes:
Perkins Fuel pump, B.S A. m/c Crankcase, Austin pass. Gearbox

CEP OS P NA049 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B255

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12.7 25.48 6.3 1/2 10.00315 0.248031 M/R(B)
Fits Makes:
Vickers tractor Trans shaft, Rover Speedo., Hercules Water pump, Guy Speedo., A.J.S m/c Tele. Legs

CEP OS P NA050 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B256

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 35 6.3 0.748031 10.377953 0.248031 M/R(B)
Fits Makes:
Thornycroft Exhauster, Rover Clutch pedal, Clayton - Dewandre Exhauster

CEP OS P NA052 - Oil Seal

From £16.00 (£19.20 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B269

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3 47.7 15.8 10.311024 10.877953 0.622047 M/L(LDC)
Fits Makes:
Ford Trans Rear, Borg-Warner Trans Rear

CEP OS P NA053 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B271

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.8 23.9 4.7 0.622047 0.940945 0.185039 M/R(BG)
Fits Makes:
Studebaker Trans Shift, Rambler Trans Shift, Packard Trans Shift, Nash Trans Shift, Kaiser Trans Shift, Hudson Trans Shift, GM Trans Shift, Ford Trans Shift, Chrysler Trans Shift, Borg-Warner Trans Shift, BMC Group Trans Shift

CEP OS P NA054 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B272

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 38.18 9.5 0.748031 10.50315 0.374016 M/L(Std)
Fits Makes:
Internal tractor P.T.O brake, Fordson tractor Gearchange, David Brown Fuel pump, Crossley Servo motor

CEP OS P NA055 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B273

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 35.12 9.5 0.748031 10.382677 0.374016 M/R(4B)
Fits Makes:
Russell Newbery -, Leyland Cyl head, B.S.A. m/ c Crankshaft

CEP OS P NA056 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B275

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.8 28.65 9.5 0.622047 10.127953 0.374016 M/R(BD)
Fits Makes:
Wolseley Gearbox, Rover Gearbox, Riley Gearbox, Morris Gearbox, Metropolitan Gearbox, Austin Healey Change spd., Austin Gearbox

CEP OS P NA057 - Oil Seal

From £20.00 (£24.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B276

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.2 54.2 27.8 10.188976 20.133858 10.094488 M/F/R(Spec)
Fits Makes:
Morris Gearbox, M.G. Gearbox, Austin Healey Gearbox, Austin Gearbox

CEP OS P NA058 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B277, NA039, B222

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19.8 38.18 9.9 0.779528 10.50315 0.389764 M/R(Std)
Fits Makes:
Perkins Aux Drive

CEP OS P NA059 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B281

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 44.53 9.5 10.122047 10.75315 0.374016 M/R(BD)
Fits Makes:
Russell Newbery , Jowett Gearbox, B.S.A mfc. Gearbox, Brockhouse P.T.O.

CEP OS P NA060 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B282

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3 47.7 7.9 10.311024 10.877953 0.311024 M/R(B)
Fits Makes:
Leyland Front Axle

CEP OS P NA064 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B298

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
14.2 27.05 4.5 0.559055 10.064961 0.177165 M/R(B)
Fits Makes:
Norton M/c Timing Cover

CEP OS P NA065 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B302

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 40.16 9.5 0.748031 10.581102 0.374016 M/R(4B)
Fits Makes:
Lucas Generator, BSA M/c Crankshaft

CEP OS P NA067 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B306

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1 44.53 4.7 10.185039 10.75315 0.185039 M/R(B)
Fits Makes:
Norton m/c. Crankshaft, A.JS m'c. Driving shaft

CEP OS P NA068 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B308

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 35.1 6.3 0.874016 10.38189 0.248031 M/R(3B)
Fits Makes:
Villiers Crankcase, Trojan Steering, Rootes Fuel pump, Petter-Mclaren , Perkins Sev. applic., Oliver-Cletrac P.T.O., Massey-Ferguson Sev. applic. , Lincoln Steering, Karrier Fuel pump, Internal truck Aux. trans., Hillman Steering, G.M.grp. Steering, Ford truck Aux. trans., Faden Steering, Electrojan Steering, Dodge truck Aux. trans., Daimler Steering, Cov. Climax Hyd. pump, Conveyancer Torque conv,, Commer Fuel pump, Buick Steering, B.S.A. Sev. applic., B.M.C. Fan support, Blaw Knox Hyd. pump, Aveling Barford Hyd. pump, Austin Steering, Allis Chalmers Steering

CEP OS P NA069 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B309

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3 47.11 6.3 10.311024 10.854724 0.248031 M/R(3B)
Fits Makes:
Triumph pass. Rear hub, Reliant Rear hub, Standard Rear hub, Morris Rear hub, outer

CEP OS P NA070 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B316

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 35 9.5 0.874016 10.377953 0.374016 M/L(Std)
Fits Makes:
Waukesha Water Pump, Vauxhall Steering, R/Hornsby Oil Pump, International Steering, Case Hyd Pump, Allis Chalmers PTO

CEP OS P NA071 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B318

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 44.53 11.1 10.122047 10.75315 0.437008 M/R(B)
Fits Makes:
Matchless m/c. Sev. applic., Fordson tractor Hyd. power, Electricar Rear hub, A.J.S. m/c. Sev. applic

CEP OS P NA075 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B342

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 44.53 9.5 1 10.75315 0.374016 M/R(B)
Fits Makes:
Villiers Red. gear, Seddon Gearbox, Petter-Mclaren Water pump, J.A.P , Excelsior rn/c. Crankshaft, Commer P.T.O

CEP OS P NA076 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B343

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 36.56 3.7 10.122047 10.43937 0.145669 M/R(B)
Fits Makes:
Velocette Bevel Drive

CEP OS P NA078 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B346

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
7.9 14.41 6.3 0.311024 0.567323 0.248031 M/R(B)
Fits Makes:
Wolseley Speedo., Standard Speedo., Riley Speedo., Panther rn/c. Rear susp, Morris Speedo., M.G. Speedo., Metropolitan Speedo., Austin Healey Speedo., Austin Speedo.

CEP OS P NA079 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B347

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 44.53 7.9 10.122047 10.75315 0.311024 M/R(B)
Fits Makes:
Triumph Mc Flywheel

CEP OS P NA080 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B348

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 47.82 9.5 10.122047 10.882677 0.374016 M/R(4B)
Fits Makes:
Wolseley Diff cover, Tasker trailer Axle, Seddon Sev. applic, Nuffield Governor, Morns Diff. cover, Leyland Water pump, Foden Wormshaft, David Brown Creeper gear, Austin pass. Diff cover, Austin pass. Shock abr, Albion Sev. applic, A.E.C Sev. applic

CEP OS P NA081 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B349, 5330998017012

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 41.35 9.5 1 10.627953 0.374016 M/R(B)
Fits Makes:
Villiers Crankshaft, Rotary Hoes Clutch, Panther m/c Crankshaft, Excelsior m/c Crankshaft, County Top idler

CEP OS P NA083 - Oil Seal

From £11.00 (£13.20 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B355

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 41.35 9.5 0.748031 10.627953 0.374016 M/R(B)
Fits Makes:
Excelsior Crankshaft

CEP OS P NA084 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B358

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17 34.13 4 0.669291 10.343701 0.15748 M/R(B)
Fits Makes:
Simms Fuel Pump, CAV Fuel Pump

CEP OS P NA085 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B359

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 44.65 9.5 10.122047 10.757874 0.374016 M/R(4BDAT)
Fits Makes:
Sunbeam Crankshaft, James Mc Crankshaft, Fran.-Barnett Crankshaft

CEP OS P NA087 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B361

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 44.7 6.1 1 10.759843 0.240157 M/R(4B)
Fits Makes:
Thornycroft Air Comp, Leyland Air Comp, Commer Steering, C-Dewandre Air Comp, Ariel Mc Crankshaft, Albion Air Comp.

CEP OS P NA088 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B362

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
23.8 44.53 9.5 0.937008 10.75315 0.374016 M/R(Std)
Fits Makes:
AEC Water Pump

CEP OS P NA089 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B363, 2910998217555

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 31.95 6.3 0.748031 10.257874 0.248031 M/R(3B)
Fits Makes:
alternative use ref NA024t, Villiers Crankshaft, Standard Steering, Rambler Steering, Packard Steering, Nash Steering, JA P. , Internal tractor P T.O. shift, Hudson Steering, Hough Hyd. valve, Ford grp Steering, Cov Climax Water pump, Commer Steering, Chrysler grp Sev. applic., Chevrolet Transfer box, Case Steering, B.M.C Steering, Bolinder Water pump, Austin Shock abr., Allis Chalmers Control Valve, Albion Aux. drive

CEP OS P NA090 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B364

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17 35.2 8 0.669291 10.385827 0.314961 M/R(4B)
Fits Makes:
Simca Steering, Renault Clutch, Lloyd Trans. gear, Lambretta Crankshaft, Fiat Steering

CEP OS P NA091 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B366

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 38.18 6.3 1 10.50315 0.248031 M/R(B)
Fits Makes:
Triumph pass. Gearbox, B.S.A. Sev. applic, Ariel m/c Camshaft

CEP OS P NA092 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B367

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 47.82 6.3 10.122047 10.882677 0.248031 M/R(3B)
Fits Makes:
Triumphm c Crankshaft, Cov Climax Sev. applic., B.S.A. M/C Crankshaft

CEP OS P NA095 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B372

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 47.7 11.1 10.374016 10.877953 0.437008 M/R(B/DAT)
Fits Makes:
Norton m/c Front fork
Product Image

CEP OS P NA098 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B382

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
13.5 36.9 4.5 0.531496 10.452756 0.177165 M/R(Spec)
Fits Makes:
Triumph m/c Magneto, Nonon m/c Magneto

CEP OS P NA099 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B384

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 41.27 9.5 0.874016 10.624803 0.374016 M/R(Std)
Fits Makes:
Russell Newbery , Nu/field tractor Fuel pump, Morns comm Fuel pump, Austtn comm. Fuel pump

CEP OS P NA100 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B388

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22 45.2 7 0.866142 10.779528 0.275591 M/R(4B)
Fits Makes:
Lancia Steering, Fiat Trans Front

CEP OS P NA102 - Oil Seal

From £11.00 (£13.20 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B396

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 47.7 11.1 1 10.877953 0.437008 M/R(Std)
Fits Makes:
Volvo -

CEP OS P NA103 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B397

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12 22.2 7 0.472441 0.874016 0.275591 M/R(4B)
Fits Makes:
N.S.U. Crankcase, Mercedes-Benz Trans. shift, Lanz, Ford-Taunus Trans. shift, Champion Gearbox

CEP OS P NA105 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B400

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1 44.53 9.5 10.185039 10.75315 0.374016 M/R(B)
Fits Makes:
Matchless Front Fork, AJS Mcycle Front Fork

CEP OS P NA106 - Oil Seal

From £11.00 (£13.20 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B401

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 49.35 12.7 10.374016 10.942913 1/2 M/L/R(DLR)
Fits Makes:
Sunbeam pass. Overdrive, Singer Overdrive, Humber Gearbox, Hillman Overdrive, Commer Overdrive

CEP OS P NA110 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B407

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30 40.2 7 10.181102 10.582677 0.275591 M/R(4B)
Fits Makes:
Tempo Crankshaft, Skoda Gearbox, Mercedes-Benz Steering, Lloyd pass. Sev. applic., lsetta Rear axle, Goliath Diff., Goggomobil Rear hub, Champion Crankshaft, B.M.W. Sev. applic., Alfa-Romeo Trans. drive

CEP OS P NA111 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B409

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17 28.2 7 0.669291 10.110236 0.275591 M/R(4B)
Fits Makes:
Villiers Drive shaft, Saurer Water pump, N.S.U. m/c. Sev. applic., Lloyd pass. Sev. applic., J.A.P. Crankcase, Fiat Sev. applic., Borgward Water pump

CEP OS P NA112 - Oil Seal

From £9.00 (£10.80 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B410

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 38.18 5.5 10.248031 10.50315 0.216535 M/R(BG)
Fits Makes:
Morris comm. Steering, Ford-Thames Steering, Dodge truck Water pump, Commer Steering, Bishop Steering, Austin comm. Steering

CEP OS P NA113 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B412

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 50.43 11.1 10.248031 10.985433 0.437008 M/R(Std)
Fits Makes:
Perkins Aux Drive

CEP OS P NA114 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B413, 5330998814606

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 47.7 7.9 10.248031 10.877953 0.311024 M/R(B)
Fits Makes:
Singer Front hub, Karrier Steering, Ford-Thames Steering, Dodge truck Steering, Commer Steering, Brockhouse Gearbox

CEP OS P NA115 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B414

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 35.18 7 0.984252 10.385039 0.275591 M/R(4B)
Fits Makes:
Simca Trans. front, Saurer Water pump, Saab Sev. applic., Mercedes-Benz Steering, Hanomag Blower, Fiat pass. Rear axle, Opel pass. Steering, Champion Front axle, Allgaier Power lift

CEP OS P NA117 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B420

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32 50.2 10 10.259843 10.976378 0.393701 M/R(4B)
Fits Makes:
Simca Trans Rear, Lanz Power Lift, BMW Rear Axle

CEP OS P NA118 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B421

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 40.2 8 0.984252 10.582677 0.314961 M/R(4B)
Fits Makes:
lsetta Drive shaft, B.M.W. Drive shaft

CEP OS P NA119 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B422

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 37.2 7 0.984252 10.464567 0.275591 M/R(4B)
Fits Makes:
Opel Steering, N.S.U. Crankcase, lsetta Crankshaft, B.M.W. Sev. applic.

CEP OS P NA123 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B437

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.08125 30.2006 7.14375 19/32 10.189 9/32 M/R(4B)
Fits Makes:
Mercedes-Benz Water pump

CEP OS P NA124 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B438

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.08125 30.2006 9.921875 19/32 10.189 25/64 M/R(4B)
Fits Makes:
J.A.P. Crankcase

CEP OS P NA131 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B462

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.003125 47.1932 9.921875 63/64 10.858 25/64 M/R(4B)
Fits Makes:
Scania Vabis Various, Saurer Air Brake, Panhard Gearbox, Magirus Inj Pump, Lancia Steering, Fiat Tractor Pump, Durkopp Blower, Deutz Inj Pump, Bolinder Governor, Alfa-Romeo Compressor

CEP OS P NA132 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B463

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30 47 10 10.181102 10.850394 0.393701 M/R(4B)
Fits Makes:
Scania Vabis Sev. applic., Alfa-Romeo Water pump

CEP OS P NA133 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B470

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32.54375 41.3512 4.7625 1 9/32 10.628 3/16 M/R(B)
Fits Makes:
Triumph m/c. Sev. applic.

CEP OS P NA134 - Oil Seal

From £5.00 (£6.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B471, 5330998819578

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
21.43125 30.226 6.35 27/32 10.19 1/4 M/R(B)
Fits Makes:
Triumph m/c. Mainshaft, B.S.A. m/c. Crankcase

CEP OS P NA135 - Oil Seal

From £6.00 (£7.20 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B473

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
8 16.27 7 0.314961 0.640551 0.275591 M/R(4B)
Fits Makes:
Rover Gearbox, Mercedes-Benz Fuel inj. pump, Goggomobil Tach. drive, Ford pass. Speedo., B.M.W. Tach. drive, Alfa-Romeo Rev-counter

CEP OS P NA137 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B476

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.875 28.194 7.14375 5/8 10.11 9/32 M/R(4B)
Fits Makes:
Volvo Gearbox, Saurer Water Pump, Saab Timing Cover, D.K.W. Oper. Shaft, BMW M/c Crankcase

CEP OS P NA140 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B487

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 50.1904 9.921875 1 3/8 10.976 25/64 M/R(4B)
Fits Makes:
Simca Trans. rear, Rover Gearbox primary, Alfa-Romeo Sev. applic.

CEP OS P NA142 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B492

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19.84375 35.179 6.35 25/32 10.385 1/4 M/R(3B)
Fits Makes:
Simms Fuel pump, C.A.V. Fuel pump

CEP OS P NA143 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B493

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.08125 35.179 7.9375 19/32 10.385 5/16 M/R(4B)
Fits Makes:
Fiat Steering, D.K.W. Crankshaft

CEP OS P NA144 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B494

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.971875 45.085 9.128125 1 9/64 10.775 23/64 M/F(Std)
Fits Makes:
Simca Rear Axle, Fiat Rear Axle

CEP OS P NA145 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B495

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17.065625 34.2392 3.96875 43/64 10.348 5/32 M/R(3B)
Fits Makes:
Simms Fuel pump, C.A.V. Fuel pump

CEP OS P NA146 - Oil Seal

From £12.00 (£14.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B497

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 44.6532 11.1125 1 1/8 10.758 7/16 M/R(4B)
Fits Makes:
Muirhill Sev. applic., Fordson tractor Sev. applic.

CEP OS P NA149 - Oil Seal

From £6.00 (£7.20 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B501

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17.4625 28.7782 6.35 11/16 10.133 1/4 M/R(4B)
Fits Makes:
Vauxhall Steering, Cov. Climax Hyd. pump

CEP OS P NA150 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B502

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17.4625 32.004 6.35 11/16 10.26 1/4 M/R(3B)
Fits Makes:
B.S.A. m/c. Gearbox, Ariel m/c. Crankcase

CEP OS P NA151 - Oil Seal

From £7.00 (£8.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B503

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 50.1904 7.14375 1 1/2 10.976 9/32 M/R(4B)
Fits Makes:
Volvo Steering, Singer Gearbox, Skoda Rear hub, Fordson tractor Steering Hillman Gearbox Mercedes-Benz Sev. applic., Dodge truck Gearbox, Commer Gearbox

CEP OS P NA152 - Oil Seal

From £8.00 (£9.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B504

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.06875 56.2102 7.14375 1 21/32 20.213 9/32 M/R(4B)
Fits Makes:
Tempo Front axle, Skoda Rear hub, Opel Timing cover, Mercedes-Benz Water pump, Lancia Timing cover, Ariel m/c. Gearbox

CEP OS P NA153 - Oil Seal

From £10.00 (£12.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B506

Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 46 7 0.984252 10.811024 0.275591 M/R(4B)
Fits Makes:
Renault Rear axle, Lambretta Crankshaft